Let us know what you think...
Only logged in customers who have purchased this product may leave a review. Log in now
Original price was: RM68.50.RM58.90Current price is: RM58.90. -14%
Availability: 12 in stock
Based on skin research:
– A long lasting dry feeling – just like bare skin.
Reduce stuffiness and continuous cushion soft & dry feeling for delicate skin!
– Soft poo leak guard with 3D side gather and back gather.
Minimize soft poo contact with skin
Prevent side leakage and helps avoid leakage from the back.
** for active babies [Size S, M, L, XL]
– Superb absorbency
Merries’ unique block shaped absorbent core instantly draws in and locks away pee, leaving the diaper surface drier for longer usage.
– Ultra soft and fluffy surface
– Merries bunnies cute designs
– Soft Reusable Magic Seal
– Colour-changing wetness indicators
When the strips change colour to dark green, it is time to change the diapers.
Spread out the new diaper and raise the inner gathers, lift the diaper over your baby’s navel. Hold down the side of the diaper and pull the tape over.Ensure both sides are symmetrical before fastening. Fasten the tape and give a slight tug at the back to ensure that the tape is in place. Adjust the side gathers around the thighs and ensure that the side gathers are not folded inwards.Open a new piece of pants, put your hands through the bottom of the pants diaper and gently ease your baby’s legs into the openings. If you are putting on the pants diaper while your baby is standing, make sure he can support himself. Stretch the pants diaper open and place one foot in first before the other. Lift the waistline of the pants diaper above your baby’s navel Check the fit around the elastic waistband and ensure that the gathers around the thighs are not folded inwards. * Use your fingers to adjust the inner gathers, so as to prevent leakage.
Top layer is made of non-woven gentle microfiber textile// Inner absorbing layer is made of palm wood fibres whitened by the use of bleachless technology and polymeric absorbent granules.The paper pulp after grinding is mixed with the polymer to produce a thin layer. This becomes the absorbent core//Outer layer is made of air permeable impregnated non-woven textile and/or polyolephine film//Stickers and the adhesive tape is also made of air permeable/perforated polyolephine, for the elastics synthetic or natural rubber is used. The tape is less than 1mm wide
Only logged in customers who have purchased this product may leave a review. Log in now
What others are saying
There are no contributions yet.